Here you will find brochures, case studies and more....
Unser White Paper beschreibt einige der Herausforderungen, die sich
in der Fleischindustrie hinsichtlich der Produktreinheit und -sicherheit
ergeben und erklärt die verfügbaren Technologien, die für die Detektion
von Fremdkörpern zur Verfügung stehen.
Our White Paper informs you about the criteria that
need to be considered when you choose machines and systems for the
protection against contaminants and for metal detection.
Our White Paper describes the development of technologies in
contaminant detection in the food industry.
In this White Paper we show you the key benefits and
diverse application possibilities of x-ray technology and how these systems help
you to ensure your product quality.
How easy is it to install the metal detector in the production line – and
how easy is it for your staff to operate the device?
In our white paper, we provide a detailed
outline of the issues, their causes and the necessary countermeasures for
eliminating metal contamination in the plastics processing industry.
With our booklet
about X-ray inspection of food products we give you an overview of x-ray
inspection in general, important food standards and Sesotec's
solutions.
In our eBook we show you, amongst
others, which challenges plastic recyclers, manufacturers and processors are
faced with in the context of the circular economy.
In our white paper we provide you with five useful tips on how to achieve an optimum
set-up on your metal detectors to ensure you are getting the best possible
performance and guaranteeing the purity of your products .
In our e-book we show you, amongst others, what challenges the development of the world's population and especially food safety pose for manufacturers and processors and how they can still be mastered.
This
Whitepaper outlines the legal requirements for food safety in some
of the world’s major markets and compares them with the most common standards.
This information is meant to help food industry companies choose the best
standard for their business.
The Whitepaper explores the challenges that
metal contamination poses to compounding and masterbatch production and
considers the key features that metal separators must have to provide an
adequate solution.
Despite the breadth of technology available for foreign object detection, certain types of food products remain difficult to inspect via conventional methods. The reason for this is that some foods have high levels of product effect, which can interfere with metal detection. This white paper examines the phenomenon of product effect, the problems it can cause, and why artificial intelligence offers an innovative and promising solution.
The plastics industry is under pressure. Between climate change, excessive consumption of finite resources, and vast amounts of plastic waste in the world’s oceans, plastics are coming to be seen in a different light by politicians, businesses, and consumers alike. Read in our e-book about the most important factors of a functioning circular economy, especially which challenges and opportunities exist for recyclers and plastics processors.
This guide is intended to help quality managers and production managers in food processing companies to generate a common understanding regarding validation and verification processes in their own organization and to implement appropriate procedures.
Download
As the world population grows and global living standards rise, the food industry is confronted with a number of challenges and opportunities, especially in the area of Food Safety. This e-book is meant to offer a comprehensive overview of the varying and influential factors shaping the future of food manufacturing and processing.
In the new Sesotec White Paper "Using recycled materials in plastics processing" you will learn about
Which building blocks are necessary for a closed-loop plastic circular economy and which important parameters there are to close the loop, we will go into in the second part of the
"Circular Economy"
article series.
In the first part of our e-book article series "Food Safety", we looked at the factors that play an important role in the food industry from different perspectives. In the second part of the article series, we will discuss what support is available for the effective implementation of various food safety measures.
We explain the path from preventive to predictive maintenance and how this will make your production more efficient in the white paper "Future-proof: The path from preventive to predictive maintenance in the food industry”.
In this white paper, we explain the developments in the field of artificial intelligence for sorting recycling and show how you can benefit from them to make your processes more precise, more sustainable and more profitable.
Download
Almi, an Austrian company headquartered near Linz, and one of the
leading manufacturers of quality flavourings and additives for sausage,
meat, ham and fish products, uses Sesotec “Hygienic Design” metal
detectors throughout their entire production process.
Separately purchased recyclate often contains various different polymers as well as metal contaminants such as aluminum, brass, and stainless steel. Learn in our Case Study how Sitraplas has solved this problem.
The „Alte Gewürzamt“ produces 120 tons spices and spice mixtures per year on 4.000 square meters. The HACCP analysis revealed an increased risk of contamination with metal, stones and glass. An inspection at the outgoing goods was therefore required to meet the quality standards.
SITRAPLAS GmbH is a producer of high-performance engineering plastic compounds. Unplanned downtime is a nightmare for every company, but especially for continuous production facilities. When metal separators are networked with plastic processing machines, the flow of information between machines can be monitored.
Pneumatic conveying is common within the milling industry to move large volumes of products. This firm was looking for a metal detection solution to provide enhancements to their food safety initiatives (GFSI) within the challenge of pneumatically conveying the finished product to bulk carriers.
To avoid any metal in the powder, CIPSA wanted to inspect the PVC compounds before they enter the pelletizer. This was to protect the extruder screw from damage and avoid expensive production stops.
Reiling is prepared to fulfill this need, offering an entire range of services from collection (full service or DIY), to processing (converting bottles to flakes), to creating carefully controlled end products. For those who will eventually buy the flakes, color and material purity are of central importance, as high-quality starting materials are needed to manufacture new products.
While processing virgin glass-filled material together with regrind, the same problem was coming up up over and over again. Metal inclusions were clogging the hot runners of the molds, leading to as many as 10 emergency stops and 2 to 3 costly repairs per month. After careful consideration of the production environment and manufacturing specifications, the metal detection system PROTECTOR 40 was installed along with the magnet system SAFEMAG at the feed hopper of the injection molding machine.
The Backwelt Pilz produces pre-baked and pre-cooked deep-frozen baked goods, for the food retail trade, petrol station shops and system gastronomy. In order to ensure that bread and rolls are absolutely free of foreign bodies, the Backwelt Pilz decided, in addition to the existing metal detectors, also to install RAYCON D+ X-ray inspection equipment for packaged products.
When this customer looked for a metal detector, he expected this system to remove metallic contaminations from dry spices inspected in pneumatic pipes without causing any interruptions of the production process.
The quality requirements of the chemical industry are particularly high. Metal detectors play an essential role in the refinement of solids to ensure a consistently high product quality and safety. At the same time, the customers expect quick setup times to achieve high flexibility and efficiency.
Founded in 1890, the Josef Manner & Comp. AG is the number one specialist for wafers, dragées,
and marshmallow products
in Austria.
As a leading
manufacturer of product
inspection technology, Sesotec supplied Manner with three RAYCON x-ray systems to help them renew their IFS certification in 2019. The solution was a success:
their IFS certificate was renewed and both production
sites continue to operate at the highest level of accreditation.
Founded in the 1960s, H. Loidl Sausage Producers and Distributors GmbH & Co KG attributes their rapid growth to the high quality of their salami products. Once ripe, some Loidl salami products are packaged in slices. This requires
removing the casing and the aluminum clips by hand. In some cases, residue from the aluminum clips remains on the salami. The standard metal detection solutions Loidl had used up un til that point were not sensitive enough to reliably detect the metal contaminants. So Loidl turned to Sesotec in search of a solution for detecting and automatically rejecting metal contaminants from salami sticks.
For more than 335 years and 14 generations, Rubinmühle has been managed by the Rubin family.
Customers in Europe and beyond benefit from their reliable and flexible supply of innovative, high-quality grain products.
As quality requirements have become
more stringent over time,
Rubinmühle
commenced a search for a solution that could
inspect grain flakes with the best possible detection rates.
Among the favorite products of Tunacor Fishing Ltd are their fish sausages, which are especially celebrated in Spain. However, every now and then they would receive complaints from customers about bits of metal in the sausages.
FF Frischfleisch AG was searching for a way to fully trace 100% of products subject to complaints. Such a solution would require the systematic documentation of production.
In cooperation with Kundert, the Swiss sales partner, Sesotec was able to develop a solution to this challenge onsite.
Many customers face the problem of lacking the knowledge of which setting parameters can cause a significant change in product safety and process relevance. A validation process can aid these customers to overcome this challenge and take a successful path towards compliance with food safety standards. Such as process can also be used as a service.
Foreign materials posed the biggest challenge to the new plant.
Contaminants such as ceramics, stones, porcelain (CSP), metals, paper,
and plastics comprise as much as 15 to 20% of the total weight of all
collected glass waste. To overcome this challenge, KRS supplied a
sorting system that meets these requirements.
In a plant equipped with stateof-the-art (sorting) technology, Futurapet recycles plastic waste. The secondary raw materials obtained are returned to the plastics processing industry. When Futurapet was founded, General Manager Oğuz Engin and his t eam were looking for innovative solutions that efficiently deliver high-quality end products.
Reiling relies on sound quality inspection with sorting and material analysis systems from Sesotec
Milchwerke
Schwaben processes 410 million kilograms of milk and whey each year.
Metal
detection must be installed at various checkpoints to control for the quality
of dairy products. Butter and rice pudding, for example, are transported
through pipelines prior to filling. In
order to ensure these packaged products are free of metallic contaminants,
metal detectors are used.
As a new major company with the highest quality requirements, CREMER needs a powerful and reliable metal detection system to ensure that its production facilities meet international standards and reliably produce safe products. All in the interest of food safety.
Reliable and precise sorting with multisensor sorting systems from Sesotec
Mission PET sees the circular economy mission in the consistent implementation of PET recycling. The bandwidth for the use of recycled PET material is diverse. However, only high-purity rPET material also meets the requirements that correspond to those of virgin material. The demands placed on the recycling process for preparing the PET material are correspondingly high. Best decontamination and material cleaning of the PET starting material are the prerequisites for maximum purity of the end product.
EUROVERDE‘s entire product range is the result of a quality process at the highest level. In the field of foreign matter management, EUROVERDE has been using various metal detectors for years to separate metal particles of any kind from the products.
Thanks to the new Sesotec technology, more valuable, dark cullet remains in the material cycle. The proportion of glass recovered is significantly increased once again and can be used to add value in high-quality melting applications.
Our client in northern Germany employs around 600 people and produces single and double-sided adhesive tapes on production facilities that are among the most advanced worldwide. Raw materials for adhesive tape production can contain tiny metal particles. Even the smallest foreign object that enters production poses a significant risk.
As Plastiques ZD grew, it became necessary to find an environmentally friendly and cost-effective solution for recycling defective parts and production waste. The company turned to the long-time Sesotec partner, MAT Technologic, for a solution.
Brochure about the production and processing of meat products.
Sorting and Detection systems for every stage of the Circular Economy in the plastics industry.
The brochure highlights
the entire Sesotec product portfolio, which is specially tailored to the needs
of the plastics industry.
Metall-Separator für Freifallanwendungen mit drehbarer Separationseinheit
Metall-Separator für Extruder, Spritzgieß- und Blasformmaschinen
Metall-Separator für Spritzgießmaschinen, Extruder und Blasformmaschinen
Metall-Separator für pneumatische Förderleitungen in der Lebensmittelindustrie
Plate type metal detector for installation in conveyor belts and material chutes
Splitable metal detector for installation on conveyor belts and material chutes
Flächen-Metalldetektor zum Einbau in Förderbänder und Materialrutschen
Kompaktes Metall-Detektionssystem mit Förderband zur Untersuchung von Stückgütern
Rohr-Magnet für Spritzgießmaschinen, Extruder und Blasformmaschinen
Rohr-Magnet für Spritzgießmaschinen, Extruder und Blasformmaschinen
Product inspection system for slim and packaged products at moderate pricing
Multi-Sensor Sorting System for the Plastics Recycling Industry
Multi-Sensorsortiersysteme für die Recycling-Industrie
High-performance metal separator for resin and compound manufacturers
VISUDESK, the new visualisation software for sorting machines, makes your sorting processes transparent and enables direct control for higher efficiency and higher profitability.
The RAYCON D+ MX LW is the standard model for inspecting lightly
packaged products. Therefore, this unit is equipped with an innovative
conveyor belt design that does not require curtains.
RAYCON D+ HX LW is the high-end model for inspecting light packaged
products. Therefore, this device is equipped with an innovative conveyor
belt design that does not require curtains. It achieves the highest
detection accuracies.
The RAYCON D+ MX BULK is the standard device for inspecting unpacked
bulk materials. Pneumatically driven flaps ensure minimal loss of good
material.
RAYCON D+ HX BULK is the high-end model for the inspection of unpacked
bulk materials. It achieves the highest detection accuracies.
Pneumatically driven flaps ensure minimal loss of good material.
The RAYCON D+ HX Dual Energy high-end X-ray inspection system detects
difficult-to-detect low-density contaminants such as certain plastics
and cartilage.
Sesotec
has completed the proven RAYCON product family and thus offers X-ray inspection
solutions for all applications in the food industry.
